REDROTOR RC STRIDER 250, Assembly Manual And User Manual

Page: 3 / 26


Center Plate with onboard RROSD engine (x1)

Bottom Plate (x1)

Top Plate (x1)

Arms (x4)

CCD Board Camera mount (x1)

Aluminum M3 x 6mm (x10)

Aluminum M3 x 8mm (x4)

Aluminum M3 x 10mm (x4)

Aluminum M3 x 16mm (x10)

Nylon M3 x 3mm Spacer (x14)

Nylon M3 x 12mm (x4)

Nylon M3 hex nut (x4)

Nylon 35mm F/F Standoff (x10)

Nylon 10mm M/F Standoff (x4)

Nylon M3 washer (x4)

Rubber Soft Bobbin (x3)

Captive nut (x8)

M3 Nylon locking nut (x4)
If you find anything missing please contact your retailer or email SUPPORT@REDROTOR.COM immediately.

M3 Allen/hex key/driver *size #2

M3 Hex socket driver

Soldering Iron with a thick tip

60/40 Rosin core solder or varying thickness

Shrink Tubing of various diameters

(Optional but recommended) Zip ties of varying sizes

(Optional but recommended) Battery Strap (Scorpion or other branded Straps)

(Optional but recommended) Wire Mesh Braid or Paracord

(Optional but recommended) Solder Flux

(Optional but recommended) Servo Crimping Tool

(Optional but recommended) Male Servo Crimp ends 2.54mm