22
Sample OSD screen shot running RUSH KV mod OSD Firmware
When assembling leave enough motor/esc wire length so that you can still fold for travel and extend to
6 inch configuration. You can use twisty ties to affix wiring to frame to keep it out of the way of props.
Crashes happen! Be sure to check all arm pivot screws before each flight to ensure they are tight. After
several crashes they may loosen up and start to back out.
On a hard crash the arms will move back in the slots to absorb the force of the crash and prevent things
from breaking. Make sure to check your arms that they are forward in the slots before flying again. You
may need to slightly loosen the nuts to move them forward and re-tighten.
If using the HD Camera anti-vibration plate and zip ties set to the right tension you should never need to
adjust. If the plate is not secured with zip ties it may fly off on a crash. If your zip ties are too loose the
damper heads may unseat and need to be reseated.
To fold the quad for storage/travel, loosen the pivot screws and the nuts under the arms slightly. You
can pull the arms outward and fold them back in.
