Optimizer User’s Guide Copyright © Global Marine Networks, LLC Page 18 of 38
5.
TCP Port
- Enter the TCP port number to broadcast the GPS data to. The default is
set to the standard TCP Port for NMEA 183 devices of 11102. (Note: configure the
destination software to match this port number; or, change this entry to match the
requirements of the destination software.)
The data will be broadcast to both the UDP Port and the TCP Port.
It is important to
make sure that these two ports are NOT set to the same port number.
To use the GPS Repeater feature, your computer must be connected to the Optimizer
WiFi network or directly connected to the LAN port of the Optimizer.
