background image

Overview 

Satellite broadband terminals and devices allow 

you Internet connectivity almost everywhere on the 

planet. With this amazing functionality, however, 

comes the risk of very high airtime bills. 

Optimizer Voice allows you precise control over 

who can access your satellite Internet connection, 

as well as how they can use that connection. This 

gives you great flexibility to control your satellite 

airtime and helps prevent unwanted airtime bills. 

Optimizer Voice helps prevent billshock in the 

following ways:

By default, its built-in firewall blocks all Internet 

activity except RedPort Compression Email 

services, XGate phone, and RedPort 

compression web browsing.

Its built-in Captive Portal allows you to restrict 

web activity. You can generate PIN-codes that 

can be given away or sold to control web 

access.

The unit can be configured to allow other kinds 

of tra

c (say, apps on a phone), while still giving 

you control over usage.

Email with RedPort is compressed up to 95% of 

its original size, meaning lower data usage and 

faster data transfer.

Web browsing can be compressed by a factor of 

3 to 5, allowing for faster data transfer and lower 

data usage.

Using the local WiFi network, you can assign 

unlimited phone extensions and make 

3

Summary of Contents for Optimizer Voice



















Reviews: