manualshive.com logo in svg

RedPort Optimizer Voice, Quick Start Manual, Page: 14 / 18

Share
Download
RedPort Optimizer Voice Quick Start Manual Download Page 14

You can then click on the “Home” tab, scroll about 

halfway down the page to the “Email 

management” section, and click on “Create and 

Manage Crew Email Accounts” button.

In this section, you can add sub accounts for 

Optimizer Voice email. 

PBX Voice Setup 

Optimizer Voice has a full-featured PBX that allows 

you to have unlimited extensions, free local area 

calling, and SMS. By default, 4 extensions have 

been created in the system. 

201

 - Default: Enabled for both inbound and 

outbound calling and inbound and outbound SMS

202

 - Default: Enabled for outbound calling and 

outbound SMS only

203

 - Default: Enabled for outbound calling and 

outbound SMS only 




204

 - Default: Enabled for outbound calling and 

outbound SMS only

The PBX settings can be found in the web 

interface under Services > VOIP PBX. This is where 

you can change and enable SIP extensions and 

register for RedPort Multi-VoIP service. 

14

Summary of Contents for Optimizer Voice



















Reviews:

No comments