Sailor 150, Sailor 250, and Sailor 500
Please ensure that DHCP is enabled on your Sailor
terminal. Refer to your Sailor user manual for
instructions on how to turn on DHCP.
Connecting your Sailor Fleetbroadband terminal to
Optimizer Voice via Ethernet will automatically
enable VoIP-to-Circuit-Switch.
Unless you have RedPort VoIP service enabled, all
outbound voice calls will automatically use your
standard satellite airtime rates.
The only time you will need to go to the “Sailor”
tab in the Optimizer Voice web interface is if your
Sailor FleetBroadband terminal is not your primary
device (ie: if it is being used for failover with a
VSAT system), if you have changed the password
for the Sailor 501 extension, or if you want to use a
di
ff
erent extension than 501. (This may be the case
if you have IP phones plugged into your Sailor
system).
If any of these cases is true, you will need to go to
Services > VoIP PBX > Sailor FBB and
1. Input the IP address of the terminal (refer to the
Sailor user manual or your installation
technician for this address).
2. Change the extension number.
3. Change the password for that extension.
4. Hit “Save and Apply”
Inmarsat IsatHub iSavi
17
