background image

11 

GPS Tracking

 

Aurora works as a tracking device with the industry-leading 

RedPort Tracking service. Aurora provides tracking data using 

the integrated GPS chip built directly into the satellite terminals.  

 

Aurora works with the Iridium network and offers tracking  

Tracking service with Aurora is a premium service with a 

monthly fee. If you don't have tracking enabled, please contact 

your service provider for more information.  

 

Aurora can also send position reports via SMS.  

 

XGate Satellite Email Service 

 

XGate is the world’s leading independent satellite email, web 

and weather service. Aurora blocks all data traffic from going 

over your satellite connection except XGate-compressed email, 

web and weather data. 

 

XGate is available for several Operating System platforms. You 

will find links for all versions here: 

http://www.redportglobal.com/support/xgate-downloads  

 

We recommend that you register your service before installing 

the software. XGate must be registered in order to receive a 

valid username and password. You can register here: 

http://www.globalmarinenet.com/xgate_registration_voucher.p

hp 

 

Online registration is required for new users that have only an  

iOS and/or Android device. Computer users are welcome to 

register online as well; or, you can register from within the 

software (see the XGate Help File > Register for Service for 

details).

 

If using an Analog phone adapter with Aurora (sold 

separately), the phone adapter will assign line 1 (the Captain 

line) to extension 201 and line 2 (if using a dual phone 

adapter) to extension 202.  

 

Users using the XGate Phone app in addition to analog 

adapters need to change the settings in XGate Phone or 

other SIP client to change the SIP extensions to something 

other than 201 and 202 (since those two extensions will 

automatically be assigned to the analog adapters and will 

cause conflicts if the SIP clients try to use those same 

extensions). 

 

Voice With Analog Phone

 

Aurora will also work with one or two analog phones by using 

an Aurora analog phone adapter (sold separately).  

 

1-Port Analog Adapter 

This adapter provides an interface between the Aurora unit 

and one analog telephone to allow you to make phone calls

over satellite with a standard telephone. This adapter is 

powered by a 12V adapter. This adapter is sold separately. 

Please contact your satellite dealer for more information.  

 

2-Port Analog Adapter 

This adapter provides an interface between the Aurora unit 

and two analog telephones to allow you to set up a PBX 

system with multiple analog telephones. This adapter is 

powered by a 5V adapter. This adapter is sold separately. 

Please contact your satellite dealer for more information.  

 

Both analog adapters can work in conjunction with 

smartphone use. Care needs to be taken, however, in 

assigning the appropriate extensions to each device so that 

they don’t conflict.  

 

12 

11 

GPS Tracking

 

Aurora works as a tracking device with the industry-leading 

RedPort Tracking service. Aurora provides tracking data using 

the integrated GPS chip built directly into the satellite terminals.  

 

Aurora works with the Iridium network and offers tracking  

Tracking service with Aurora is a premium service with a 

monthly fee. If you don't have tracking enabled, please contact 

your service provider for more information.  

 

Aurora can also send position reports via SMS.  

 

XGate Satellite Email Service 

 

XGate is the world’s leading independent satellite email, web 

and weather service. Aurora blocks all data traffic from going 

over your satellite connection except XGate-compressed email, 

web and weather data. 

 

XGate is available for several Operating System platforms. You 

will find links for all versions here: 

http://www.redportglobal.com/support/xgate-downloads  

 

We recommend that you register your service before installing 

the software. XGate must be registered in order to receive a 

valid username and password. You can register here: 

http://www.globalmarinenet.com/xgate_registration_voucher.p

hp 

 

Online registration is required for new users that have only an  

iOS and/or Android device. Computer users are welcome to 

register online as well; or, you can register from within the 

software (see the XGate Help File > Register for Service for 

details).

 

If using an Analog phone adapter with Aurora (sold 

separately), the phone adapter will assign line 1 (the Captain 

line) to extension 201 and line 2 (if using a dual phone 

adapter) to extension 202.  

 

Users using the XGate Phone app in addition to analog 

adapters need to change the settings in XGate Phone or 

other SIP client to change the SIP extensions to something 

other than 201 and 202 (since those two extensions will 

automatically be assigned to the analog adapters and will 

cause conflicts if the SIP clients try to use those same 

extensions). 

 

Voice With Analog Phone

 

Aurora will also work with one or two analog phones by using 

an Aurora analog phone adapter (sold separately).  

 

1-Port Analog Adapter 

This adapter provides an interface between the Aurora unit 

and one analog telephone to allow you to make phone calls

over satellite with a standard telephone. This adapter is 

powered by a 12V adapter. This adapter is sold separately. 

Please contact your satellite dealer for more information.  

 

2-Port Analog Adapter 

This adapter provides an interface between the Aurora unit 

and two analog telephones to allow you to set up a PBX 

system with multiple analog telephones. This adapter is 

powered by a 5V adapter. This adapter is sold separately. 

Please contact your satellite dealer for more information.  

 

Both analog adapters can work in conjunction with 

smartphone use. Care needs to be taken, however, in 

assigning the appropriate extensions to each device so that 

they don’t conflict.  

 

12 

Summary of Contents for Aurora Iridium

















Reviews: