Redmond SkyKettle RK-M216S-E, User Manual

Page: 9 / 168

SkyKettle RK-M216S-E
9
GBR
FRA
DEU
NLD
ITA
ESP
PRT
DNK
NOR
SWE
FIN
LTU
LVA
EST
ROU
HUN
BGR
HRV
SVK
CZE
POL
RUS
GRE
TUR
UKR
KAZ
be automatically enabled. Water is not re-boiled. At the end of the process, the appliance
switches to the standby mode.
To enable the Keep Warm mode during boiling, select the necessary temperature using
(the indicator will come on next to the selected value). To disable the mode during
boiling, press , until the temperature indication goes off.
Disabling audible signals
To disable and re-enable audible signals in the standby mode, press and hold down for
several seconds.
When re-enabling the audible signals the appliance will produce a beep.
Safety Systems
• The kettle is equipped with the system of auto shut-off upon boiling or removing
from the base.
• In case of water shortage the automatic overheat protection turns off the kettle.
Let the appliance cool down, thereafter it will be ready for operation.
III. CLEANING AND MAINTENANCE
Before cleaning unplug the appliance and let it cool down. Regularly wipe the kettle
housing and base with a damp cloth. Let the kettle and base dry thoroughly before use.
DO NOT immerse the appliance, its base, plug, or power cord in water or wash it under
running water!
DO NOT use a sponge or tissue with hard or abrasive surface, any chemically aggressive
substances, or any other agents which are not recommended for cleaning items that
come into contact with food.
While in operation scale deposits may form on both the heating element and the
housing inner walls of the appliance depending on water type being used. Use special
nonabrasive cleaning substances for kitchen utensils and appliances. Follow the prod-
uct application instructions. Thoroughly wash the appliance with water after cleaning
and wipe with a damp cloth.
ATTENTION! Before use the appliance, please, make sure that its electric contacts are dry.
Transportation and Storage
Before repeated operation or storage completely dry all parts of the appliance. Store the as-
sembled appliance in a dry, ventilated place away from heating appliances and direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids..
IV. BEFORE CONTACTING SERVICE CENTRE
Problem Possible cause Solution
The appliance does not
switch on
No power supply
Connect the appliance to a prop-
erly working electric socket
Early switch-off
There are scale deposits on
the heating element
Descale the heating element
(see “Cleaning and Mainte-
nance”)
Kettle switches off in a few
seconds
There is no water in the
kettle, boil-dry protection
system has gone off
Unplug the appliance, let it cool
down. Fill the kettle up above
MIN mark
Plastic smell during use
Appliance is new, the smell
is coming from protective
cover
The smell will disappear after
few uses
Synchronization attempt
failed
Bluetooth function on the
mobile device is disabled
Enable Bluetooth function on
the mobile device
Ready for Sky app on the
mobile device is deactivated
Run the Ready for Sky app on the
mobile device
Sync devices are too far
Ensure devices are located
within 15 meters from each
other
Operation status indicator is
not on
You should reset the set-
tings
Press and hold down the
button until the second beep is
produced
The kettle does not boil or
the boiling time is too long
Boiling time is not set cor-
rectly
Adjust the boiling time in the
Ready for Sky mobile application
NOTE! In case any failure occur in the operation of the Ready for Sky app, it is not ob -
ligatory to apply to the service centre. Apply to REDMOND technical support service and
obtain the consultation of our specialists on error elimination and/or failure in Ready for