background image

US-7

EBZ3050RH

U
S

5. For safe operation

ordinances. 

2. To reduce sound levels, limit the number of

pieces of equipment used at any one time. 

3. Operate power blowers at the lowest

possible throttle speed to do the job. 

4. Check your equipment before operation,

especially the muffler, air intakes and air
filters. 

For protecting your body from vibration 

Prolonged use of a blower, exposing the
operater to vibrations and cold may
produce whitefinger disease (Raynaud's
phenomenon), which symptoms are
tingling and burning sensations followed
by loss of color and numbness in the
fingers. 
All factors which contribute to whitefinger
disease are not known, but cold weather,
smoking diseases or physical conditions
as well as long periods of exposure to
vibration are mentioned as factors. 
In order to reduce the risk of whitefinger
disease, the following precautions are
strongly recommended. 

a: Keep your body warm. Never use

blower during rains. 

b: Wear thick anti-vibration gloves. 
c: Take more than 5 minutes of break in

warm place frequently. 

d: Maintain a firm grip at all times, but do

not squeeze the handles with constant,
excessive pressures. 

e: If you feel discomfort, redness and

swelling of your fingers or any other part
of your body, see a doctor before getting
worse. 

Maintenance 

1. In order to maintain your product in proper

working order, perform the maintenance
and checking operations described in the
manual at regular intervals. 

2. Always be sure to turn off the engine and

disconnect the spark plug before
performing any maintenance or checking
procedures. 

The metallic parts and engine cover reach
high temperatures immediately after
stopping the engine. 

3. Examine the blower at intervals for loose

WARNING

WARNING

fasteners and rusted or damaged parts.
Use special care around the fuel line, the
muffler, and the ignition wiring. 

4. When replacing the any other part, or any

lubricant, always be sure to use only
RedMax products or products which have
been certified by RedMax for use with the
RedMax product. 

5. In the event that any part must be replaced

or any maintenance or repair work not
described in this manual must be
performed, please contact a representative
from the store nearest RedMax authorized
servicing dealer for assistance. 

6. Do not use any accessory or attachment

other than those bearing the RedMax mark
and recommended for the unit. 

7. Under no circumstances should you ever

take apart the product or alter it in any
way. Doing so might result in the product
becoming damaged during operation or the
product becoming unable to operate
properly. 

Disposal 

When disposing your machine, fuel or oil for
the machine, be sure to allow your local
regulations. 

Summary of Contents for EBZ3050RH

















Reviews: