background image

US-2

EBZ3050RH

SAFETY FIRST

Instructions contained in warnings within this manual
and warning seals marked with a 

symbol on the

blower concern critical points which must be taken into
consideration to prevent possible serious bodily injury,
and for this reason you are requested to read all such
instructions carefully and follow them without fail.

Note that there may be times when warning seals peel
off or become soiled and impossible to read. If this
happens, you should contact the dealer from which you
purchased the product to order new seals and affix the
new seal(s) in the required location(s).

NOTES ON TYPES OF WARNINGS

Instructions labeled as shown at left, concern
critical steps or procedures which must be followed
in order to prevent accidents which could lead to
serious bodily injury or death.This mark is used to
indicate instructions which must be followed
without exception.

Instructions labeled as shown at left concern steps or
procedures which, if not followed correctly, could lead to
mechanical failure, breakdown, or damage.

Used to label supplementary instructions designed to
provide hints or directions useful in the use of the
product.

NOTE

IMPORTANT

WARNING

1. Parts location......................................................................3
2. Specifications .....................................................................3
3. Warning labels on the machine ..........................................4
4. Symbols on the machine ....................................................4
5. For safe operation ..............................................................5
6. Set up .................................................................................8
7. Fuel.....................................................................................9
8. Operation..........................................................................11
9. Maintenance .....................................................................12

10. Storage .............................................................................14
11. Disposal............................................................................14
12. Troubleshooting guide ......................................................14

Contents

1. Read this Blower Owner/Operator

Manual carefully. Be sure you
understand how to operate this unit
properly before you use it. Failure to do
so could result in serious injury.

2. Be sure to keep this manual handy so

that you may refer to it later whenever
any questions arise. Also note that you
are requested to contact the dealer from
whom you purchased the product for
assistance the event that you have any
questions which cannot be answered
herein.

3. Always be sure to include this manual

when selling, lending, or otherwise
transferring the ownership of this
product.

4. Do not lend or rent your machine

without the owner's manual.

5. Be sure that anyone using your unit

understands the infomation contained in
this manual.

6. Never let a child under 13 years old use

the machine. 

WARNING

Summary of Contents for EBZ3050RH

















Reviews: