23
Do not expose your control system or its components to damp for prolonged periods. If the control system
becomes contaminated with food or drink clean it off as soon as possible.
2.3 Cleaning
Clean the control system and the joystick with a cloth dampened with diluted detergent. Be careful when
cleaning the joystick and screen.
Never use abrasive or spirit-based cleaners.
3 Mating Connectors
To connect the Communication Cables:
3
Holding the connector housing, firmly push the connector into its mate until you
can no longer see the yellow plastic.
The connectors are secured using a friction system.
To disconnect the Communication Cables:
3
Holding the connector housing firmly, pull the connectors apart.
Do not hold or pull on the cable. Always grip the connector when connecting and
disconnecting.
When the control system is first switched on after a connection, or system
component change the Timer will be displayed whilst the system checks itself and
then the Re-start icon will be displayed. Switch the control system off and on
again to operate.
