Redline RDL-3000 Connect-IWS User Manual Download

Page: 99 / 254

RDL-3000

FAMILY

USER MANUAL

70-00158-03-00

Page

of 254

April 17, 2015

Service Group Status

Use this screen to monitor the status of all Service Groups. Click

Provisioning-

Service Groups

in the main menu to display the

Service Groups

screen. Click on the

status symbol (e.g., ) to display the Service Group Status screen.

Fig. 59: Web - Service Group Status Screen

General

Service Group Name

: Name of the Service Group.

Service Group ID

: A unique identifier assigned to each Service Group (128 to 159).

This value is required when using the CLI interface to modify settings.

Broadcast Ethernet packets

Discarded Packets

: Total packets discarded by this unit due to errors.

Transmitted Packets

: Total broadcast (or multicast) packets successfully transmitted

over the wireless interface (does not include discarded or errored packets).

Controls

Reset

: Click to reset displayed statistics counters.

Refresh

: Click to update displayed statistics counters.

Summary of Contents for RDL-3000 Connect-IWS































































































































































































































































Search results

Summary of Contents for RDL-3000 Connect-IWS

Reviews:

Related manuals for RDL-3000 Connect-IWS

Brands by name

Popular brands

Redline RDL-3000 Connect-IWS, User Manual

Search results

Summary of Contents for RDL-3000 Connect-IWS

Reviews:

Related manuals for RDL-3000 Connect-IWS

Brands by name

Popular brands