2
008+M
itsu
b
is
h
i Lanc
er Quic
k
LIFT Insta
ll
ation Gui
d
e
A. Repeat Steps 9-11 to attach the passenger side ball-stud. The vehicle is symmetrical so the same locators can be
used to make both sides the same.
Step 12 - Repeat steps 9-11 to attach the passenger side hood ball-stud.
A.
CYCLE EACH GAS SPRING BEFORE INSTALLING
-
firmly hold a gas spring with both hands by the
thick cylindrical end - firmly press down on the floor
or carpet and compress the spring. Compress both
springs.
Have a friend hold the hood up.
Compress each gas spring a few times - Note: If you
unable to compress the gas springs, do not worry.
Normal function after installation will also serve the
same purpose.
Step 13 - Cycle both gas springs a few times.
Step 14 - Install gas springs.
Step 15 - Insert gas spring locking clips into ball-stud sockets
A. Holding curved end of locking clip, slide the straight end back through
both holes in the hood’s ball-stud socket. Once securely through both
holes, rotate clip to ‘snap’ the locking clip onto shaft.
A. Securely snap on each end of the gas spring. Install the locking clips in the next step. Large
housing end of gas spring attaches to the hood’s ball-stud.
