manualshive.com logo in svg

Redline Communications RedMAX SU-I, User Manual, Page: 47 / 60

Share
Download
Redline Communications RedMAX SU-I User Manual Download Page 47

 

 

 Red

MAX

™

 

Subscriber Modem

 

User Manual

 

 

70-00057-01-01-DRAFT 

Proprietary Redline Communications © 2006

 December 

13, 

2006 

Page 47 of 60

 

 

5.3.14  show - Show Commands 

The fields in this section are available only by using the show command. The 
following table lists all functions available in this mode. 

Table 23: CLI - show - Show Commands 

Command 

Description 

dhcpRelayAgent 

Show the SS DHCP Relay Agent setting. 
 

0 - Disabled 

 

1 - Enabled 

ethernet 

Display the Ethernet port settings: 

AutoNegEnabled

  

- Auto Negotiation (Disabled/Enabled) 

LinkSpeed

 

 

- Link Speed (10/100) 

LinkDuplex

 

 

- Link Duplex (half/full) 

eventLog

 

Display the event log messages. 

interfaces 

Display information about the subscriber wireless and Ethernet 

interfaces. For example: 

ifIndex  Desc 

MAC Address  

ifAdminStatus  

ifType 

ifMtu 

------- -------  -------------------- 

------------------- 

---------  ------ 

 1  802.16  00:09:02:00:8c:7f 

1 

184 

2048 

  2 

802.3 

00:09:02:00:8c:7f  

1  

6  

1500

 

sysContact 

Display the system contact information.

 

sysDescription 

Display the system contact information.

 

sysLocation 

Display system location string. For example: 

 

sysLocation: 123 Mains St. Unit #12 

sysname 

Display the system name.

 

sysUpTime 

Display system up time. For example: 
 

sysUpTime: 10 days 20:28:19 

version 

Display the currently running software version.

 

 

Summary of Contents for RedMAX SU-I





























































Reviews:

No comments