3
/
9
Static protection and against electric shock
The lighting design in accordance with the type of protection against electric shock. To connect with
ground lighting power system. And ground lighting must be turned on and the ground power system,
lighting metal ground mark the port to securely connected to the mounting lighthouse.
Connect the power mains
Connected to the power mains must be performed by a qualified electrical professional to complete.
Check Fixtures power supply line voltage, frequency and other electrical data, whether marked with lamp
voltage, frequency parameters consistent, avoid high-voltage lamps burning ring. Please refer to the lamp
power fixtures use multiplied by 1.5 times, you can figure out all the lights when connected, the maximum
power supply parameter values.
Care and Maintenance
Before carrying out maintenance disassembly lighting products, to disconnect the power supply, can not
live action, after disconnecting the power supply, any part of the lamp within 10 minutes is not removable.
If you need to replace the lamp, you need to wait 15 minutes for the lamp to be operated completely
cooled.
Any lamp bulbs have life, this lamp is recommended to use foam cups 330W bulbs, light bulbs average
life of 750 hours. Computer light bulb usage time do not exceed its rated life, otherwise it may cause the
bulb bursts, the shock wave generated when the lamp exploded inside the lamp will damage the
condenser system, there are likely to generate high voltage breakdown of electronic components. Hot
lamp debris may also burn people, objects, and may even lead to a fire.
Lamp lenses or lenses and other rotating parts must be checked regularly to keep it stable, if there is
obvious damage or loose, it must be replaced promptly reinforced, to prevent accidents.
Lighting products using strong winds refrigeration, easy to dust must be cleaned at least once a week,
especially the cooling air inlet.
Luminaire housing temperature
In the heat stable working conditions, the maximum surface temperature of the lamp housing can reach
70
℃
.
Lamps
15R lamps built with a foam cup, high internal temperature, do not directly touch. If you install a new
lamp, please read the manufacturer's instructions carefully. If the lamp is damaged or thermally deformed,
should be replaced immediately.
Unpacking
Open the box, remove all accessories from the box and open the packaging, remove the fixture from the
box and place it on a level platform to facilitate related operations.
