2
/
9
Thank you for using our company's production moving heads, for your safety and convenience, please use
the lamp before you read this manual carefully.
1. THE CONTENTS OF THE SECURITY
Installation
Before lighting installation, to ensure the stability of the installation site. When reverse hanging
installation, use two sets of M10 bolt professional large hooks screwed into the bottom of the computer
lights hanging screw holes, you must make sure not to drop the lamp down on the support frame, with a
safety rope through the support bracket and lamps handle, to prevent the lamp falling and sliding. Lamps
during installation, prohibit pedestrians below. Regularly check the safety rope for wear, whether linked
to loosen. Rigging thus instability occurs, leading all the consequences arising from the lamp falling,
manufacturers do not bear any responsibility.
Minimum distance to the target object:
When the lamp during positioning, the distance between the object and the lighting lens beam irradiation
at least to keep 1.5m away.
The minimum distance from combustible body
When the lamp during the installation location, the minimum distance from any point to any combustible
material is two meters on a light surface.
Maximum ambient temperature
Highest ensure stable operation of the lamp ambient temperature does not exceed 40
℃
, the minimum
should not exceed -20
℃
.
Important Notice
This instruction manual contains important information regarding the installation and use of
products of this fixture. Please strictly follow these instructions related to installation and use.
Before opening this fixture products or want to repair, replace light bulbs, etc., make sure the
power is off.
A: Please read the entire contents of this manual carefully. (This specification please save with
light.)
B: To ensure that this product is correct, safe installation, use and maintenance, must understand
and comply with the contents of this manual operation.
C: for failing to carry out the installation, use and maintenance in accordance with the
requirements of this specification, which led lamps, property or personal injury, the manufacturer
does not assume any responsibility.
Note: Based on our ongoing product improvement, the data contained in this manual likely will
change in the future, but will be without notice to change matters. The Company reserves the
change in the product specification improvements related powers.
