4
Check the Verti-Quake
®
for loose bolts, nuts and components
before
every
operation.
If present, check the hydraulic pipelines regularly and replace these when the
hydraulic pipelines are damaged or appear old. The replacing pipelines should
comply with the technical requirements of the manufacturer.
If present, you should always make the hydraulic installation pressure-free
before working on this installation.
NEVER use the Verti-Quake
®
in the absence of protective guards and safety
stickers.
NEVER crawl under the Verti-Quake
®
.
If necessary, tilt the Verti-Quake
®
.
NEVER step off the tractor while the motor is running.
In case of maintenance, adjusting and repairs, it is necessary to block the Verti-
Quake
®
in order to prevent sinking away, driving off and/or sliding off.
Always switch off the tractor motor, take the tractor’s key out off the
ignition and disconnect the PTO in case of maintenance, adjusting and
repairs.
(Figure 2)
Figure 2
With regards for the safety of the machine and the user, use only original Verti-
Quake
®
parts for maintenance and repairs.
Only authorised technical personnel may carry out adjustments and repairs to
the Verti-Quake
®
.
Keep a record of the repair activities.
(5) The general applicable health & safety (Dutch acronym: ARBO) regulations
must also be followed in addition to the instructions in this user manual.
Relevant traffic regulations also apply in case of using public roads.
Transporting persons is not permitted!
Do not use the Verti-Quake® in the dark, in heavy rain/storm or on slopes with
an angle larger than 20 degrees.
