14
6.0
ADJUSTING THE WORKING DEPTH
(Figure 12)
Figure 12
1. If the Verti-Quake
®
is not attached to the tractor yet, make sure that you attach
it as described in Chapter 5.
2. Lift the Verti-Quake
®
by means of the tractor.
3. Activate the hydraulic outlet of the tractor and let the skids drop.
4.
Make sure that the tractor is blocked well and cannot move on its
own accord!
5.
Switch off the tractor before descending!
6. Remove the securing clips 2.
7. Pull pins 1 and 3 out of the frame on both sides of the machine and adjust
these to the required position.
Follow the instructions in Table 1 for the required working depth.
8. Secure pins 1 and 3 with the securing clips 2.
9. Activate the hydraulic outlet of the tractor and let the skids move upwards until
the pins block the skids.
Now the working depth is adjusted.
