10
3.0 LIST OF GENERAL COMPONENTS
Figure 9 shows several important components
:
Figure 9
1. Safety sticker 900.280.402:
•
First read and understand the user manual!
2. Safety sticker 911.280.402:
•
Danger of physical injury caused by rotating parts!
•
Keep a minimum distance of 4 metres from the machine!
•
Stop the tractor’s motor if repair or adjustment is needed!
All the stickers should be on the machine at all times and should be
understood!
3. The maximum entering number of PTO revolutions is 1,000 rpm.
4. The serial number is located at the left-bottom outside of the machine.
5. Adjusting mechanism to adjust the working depth and the working depth
indicator
6. Skids for adjusting the working depth and integrated Turf Hold Down system.
7. Inspection hatches for inspection of and access to the rotating parts of the
machine.
8. Manual and tool case.
9. Support jacks intended to position the machine when it is not in operation
and when work activities are carried out on the machine.
10. Back roller.
11. Scraper of the back roller (can be adjusted).
12. Bottom 3-point connecting pins.
13. Top 3-point connecting pin.
14. PTO input axle.
Cam clutch of the PTO at the protective side must be attached to this axle.
15. Hydraulic connection for adjusting the working depth.
