SunRise – Installation Manual
RE_PROD_0005 Version 3
Page 11 of 28
Issue Date 16/11/2020
•
Removing/Installing Troppo Battery
To remove or install a battery, you will need to follow these steps:
•
Remove the battery cables by pressing the button on
the side of the terminal and pull it straight up;
NOTE: When installing the battery cable, simply push it
onto the terminal until you hear a click.
•
Remove the bolt that holds the earth cable to the
battery;
•
Remove the front rail that holds the batteries in place;
•
Slide out one battery at a time. Be careful handling as
each battery weighs 42 kilograms.
To install a battery, follow this process in reverse.
Installation
ATTENTION: If the battery polarity is connected incorrectly it will damage other
batteries as well as the SunRise system.
