If the fit is not snug, loosen the adjusting nut
and rotate the stud to the desired gap and while
holding the stud tighten the lock nut (see picture on
next below). Then recheck the gap and make sure
the gap is still the same; then replace the cover.
Next remove the cover for the exhaust valve and
check to see if the rocker arm is loose if not bar the
engine over and check for a 0.006 gap. If not follow
the adjusting instructions for the intake with the
new gap setting. Replace the valve cover and the
cover on the left hand side of engine case. Start the
engine and check for oil leaks and repair as required.
Summary of Contents for KMX-50
Page 1: ...REDCAT KMX 50 MANUAL...