SmokeSight SS10LNAN V0.5
Page 12
CONDITION
CAUSE
REMEDY / ACTION
button has been pressed.
OTHE
R
Smoke alarm will not slide
along the base until it
clicks.
Battery or batteries missing
Install missing battery or batteries
False Alarm
In the event of a false alarm (alarms are sounding without any smoke present):
1.
Identify which smoke alarm/s are in alarm state – Look for the alarm/s sounding and with red LED fast flashing.
2.
On each smoke alarm in alarm state press the Test+Hush button to silence the alarm
3.
Disconnect all smoke alarms in the alarm state by removing them from their base.
4.
Clean smoke alarms in accordance with the “Maintenance, Repairs and Service” section.
5.
Re-install and test all the smoke alarms.
IMPORTANT: If the above process fails, contact a licenced electrician to investigate.
Maintenance, Repairs and Service
It is recommended that the smoke alarm is inspected monthly to ensure it is free from dirt, dust and insects. The
alarm can be vacuumed or brushed with a soft brush to remove dust, dirt or kitchen grease that has accumulated.
ALWAYS TEST THE SMOKE ALARM AFTER CLEANING.
If the smoke alarm is defective in any way, do not tamper with the smoke alarm. The smoke alarm does not contain
any user-serviceable parts. As the smoke alarm does not contain any radioactive material, disposal with domestic
rubbish is permitted in Australia and New Zealand.
Warranty
Redbusbar Pty Ltd, warrants this product to be free from defects in materials and workmanship for a period of 5
(five) years from the date of installation. Refer to the Redbusbar terms of sale for full warranty conditions
http://www.redbusbar.com/Terms-and-Conditions.html
Redbusbar reserves the right to change specifications, modify designs and discontinue items without incurring
obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this
document are correct, no warranty is given in respect thereof and the company shall not be liable for any error
therein. © Redbusbar 2018. Redbusbar acknowledges that the Activfire Certified logo is a trademark of CSIRO.
