www.redbackaudio.com.au
Redback® Proudly Made In Australia
5
Redback® A 4498
Network Connection Pack
Fig 7.
Fig 8.
Open a browser window (i.e. Edge, Chrome, Firefox etc) and type in the Serial-To-Ethernet Converters (D 4231) IP address:
“192.168.2.1” (without quotes) into the browser address as shown in figure 9.
Fig 9. User Log In
This will bring up the login page on the Serial-To-Ethernet Converter (D 4231) .
If any error is received instead, double check the Ethernet adaptor (D 2330B) configuration.
The default login details for the Serial-To-Ethernet Converter (D 4231) are:
ID: admin
Password: system
(Note: The ID and password can be changed in “Administrator Settigs” or reset manually via the switch on the side of the D 4231 labelled
“Reload”. To factory reset, first remove power, then press and hold the ”Reload button”. While keeping the botton pressed, reconnect
power and keep the button pressed for 10 seconds and then release the button. The ID and password should now be reset to the default).
Type in the ID and Password as shown in figure 9 and then press OK.
Serial Device Server
(
Redback
D 4231)
Ether
net
RS485/422
DC 9-54V
Connect to PC
9 - 54V DC plugpack
(Not Supplied)
Redback
D 2330B
Serial Device Server
(
Redback
D 4231)
Ether
net
RS485/422
DC 9-54V
Connect to red RJ45 port
on rear of compatible
Redback product.
Connect to PC
Proprietry
adaptor board
DC Power Lead
(Supplied)
Redback
D 2330B