12
Laser Receiver LR715
(refer to diagram page 5)
The LR715 is a heavy duty dual sided display rotating laser receiver, it can be
either hand held or with the staff bracket clamped onto a staff. The bubble
vials can be used to keep the receiver level.
The LR715 has two large LCD displays with progressive bars indicating when
the laser gets closer to the level mark. Move the receiver up and down (side
to side vertical rotation) slowly and watch the display change when the solid
tone is heard and the centre line is shown then the receiver is at the height
of the laser beam plane. The receiver will auto power down after 10 minutes
when not receiving laser pulses. Note receivers do not work in Scan mode.
LR715
TM
RECEIVER INSTRUCTIONS
Indicates laser beam is below
line - slide receiver down.
Indicates laser beam is above
line - slide receiver up.
Indicates laser beam is on the
line.
Power and Battery Life Indicator
Coarse/Fine and Speaker Indicator
www.redbacklasers.com.au
•
A press of the power button toggles the receiver on and off.
•
The Speaker button toggles through 3 speaker volumes.
•
Pressing the Coarse/Fine Mode button toggles through 3 levels
the first being fine mode indicated by on the LCD the accuracy of
level is at its highest with 1mm tolerance movement by the receiver
before showing it off level. The next coarser mode allows 2mm
before showing off level the third press shows no symbol on the LCD
and allows 3mm before showing off level, these two coarser modes are
more suitable for general site levelling.
•
The Back Light button toggles the LCD display back light.
Summary of Contents for EGL624
Page 1: ......
