Redarc R-12-400RS-NA, Manual

Page: 5 / 20

4
1 INTRODUCTION
1.1 Specifications
Input
Characteristics
Model R-12-400RS-NA
Max. Rated Input Current 45 A
Voltage 12 V DC
Over-Voltage Protection
16.0 ± 0.3 V DC
Under-Voltage Protection 10.5 ± 0.3 V DC
Voltage Range 10.5 ~ 16.0 V DC
No Load Current
≤ 1 A @ 12 V DC
Power Saving Mode < 0.2 A @ 12 V DC
Output
Characteristics
Continuous Output Power 400 W (VA) (± 3%)
Maximum output Power (1 min) > 400 ~ 460 W (VA) (100% ~ 115%)
Surge Power (1 sec)
< 800 W (VA)
Frequency
50 / 60 Hz ± 0.5% (Dip Switch Selectable)
Output Voltage
100 / 110 / 115 / 120 V AC (± 5% )
(Dip Switch Selectable)
Efficiency Max 88%
Short-Circuit Protection 1 Sec Shutdown
Output Waveform
(1)
Pure Sine Wave (THD < 5% @ Normal Load)
Signal and
Control
Remote Controller Panel Input REMOTE-RS (optional)
Protection
BAT. Low Shutdown
10.5 ± 0.3 V DC
BAT. Low Alarm
10.5 ± 0.3 V DC
BAT. Low Restart
12.5 ± 0.3 V DC
BAT. High Shutdown 16.0 ± 0.3 V DC
BAT. High Alarm 16.0 ± 0.3 V DC
BAT. High Restart 14.5 ± 0.3 V DC
Input Protection
(2)
Reverse Polarity (Internal Fuse)
Others
Over / Under Temperature Protection (by heat
sink) Temperature 176°F (80°C) / −4°F (−20°C)
Environment
Operating Temp.
−4 ~ 104°F — Derates to 140°F
(−20 ~ 40°C — Derates to 60°C)
Storage Temp. −22 ~ 158°F (−30 ~ 70°C)
Storage Temp. & Humidity 10 ~ 95% RH, non-condensing
Safety and EMC
Safety Standards UL 458, C22.2 No. 107.1
EMC Standards
(3) FCC Class B, CAN ICES-003(B)/NMB-003(B)
Weight
2.8 lb (1.3 kg)
Cooling
Temperature & Load Controlled cooling Fan
Dimension (W × H × D) 5.91 × 2.68 × 7.36" (150 × 68 × 187 mm)
(1) Normal load condition: Vin = 12.5 V / 25 V / 50 V, Vo = 100 / 110 / 115 / 120 V AC 80% load (PF = 1.0)
(2) Reverse polarity connection can blow the internal fuse and may damage the inverter permanently.
(3) Refer to page 16 for compliance information.