6
1 INTRODUCTION
Model: R-12-1500RS-NA
Input
Characteristics
Max. Rated Input Current
157 A
Voltage
12 V DC
Over-Voltage Protection
16.5 ± 0.3 V DC
Under-Voltage Protection
10.5 ± 0.3 V DC
Voltage Range
10.5 ~ 16.5 V DC
No Load Current
≤ 1.8 A @ 12 V DC
Power Saving Mode
< 0.1 A @ 12 V DC
Output
Characteristics
Continuous Output Power
1500 W (VA) (± 3%)
Maximum Output Power (1 min)
> 1500 ~ 1730 W (VA) (100% ~ 115%)
Surge Power (<3 sec)
< 2650 W (VA)
Frequency
50 / 60 Hz ± 0.5% (Dip Switch Selectable)
Output Voltage
100 / 110 / 115 / 120 V AC (± 5%)
(Dip Switch Selectable)
Efficiency Max
91%
Short-Circuit Protection
1 Sec Shutdown, restart to recover
Output Waveform
(1)
Pure Sine Wave (THD < 5% @ Normal Load)
Signal and
Control
Remote Controller Panel Input
REMOTE-RS (optional)
LED Indicator
Red / Orange / Green LED
Dry Contact Terminal
By a relay
Remote Control Terminal
6-port Green terminal (for inverter ON / OFF)
Protection
Input Protection
(2)
Over / Under Voltage, Reverse Polarity
(Internal Fuse)
AC Output Protection
Short-Circuit, Overload
Others
Over / Under Temperature Protection (by Heat
sink Temperature 176°F (80°C) / –4°F (–20°C))
Environment
Operating Temp.
–4 ~ 104°F — Derates to 140°F)
(–20 ~ 40°C — Derates to 60°C)
Storage Temp.
–22 ~ 158°F (–30 ~ 70°C)
Storage Temp. and Humidity
10 ~ 95% RH
Safety and
EMC
Safety Standards
UL 458, C22.2 No. 107.1
EMC Standards
(3)
FCC Class B, CAN ICES-003 (B) / NMB-003(B)
Weight
9.7 lb (4.4 kg)
Cooling
Temperature and Load Controlled cooling Fan
Dimensions (W × H × D)
9.8" × 3.3" × 16.6" (248 × 83 × 421 mm)
(1) Normal load condition: Vin = 12.5 V / 25 V / 50 V, Vo = 100 / 110 / 115 / 120 V AC 80% load (PF = 1.0)
(2) Reverse polarity connection can blow the internal fuse and may damage the inverter permanently.
(3) Refer to page 26 for compliance information.
