Red4Power R4-G002S, User Manual, Page: 25 / 28

2 5
- If you are using a USB Hub or a switch, conflicts can arise.
To check this, detach all other USB devices, reboot and
reattach the hard disc only. If this does not work, connect
the hard disc directly to the USB of the computer.
- Uninstall the drivers and reinstall them again. Update
the system, by checking with Windows Update.
Data transfer is slow / The computer is slow
Every connected USB device needs to be managed by the
system. This stresses especially during the booting of the
computer.
Use only one USB device actively at the same time. Parallel
use will reduce the speed immensely.
Make sure that the used USB-Ports are configured as USB
2.0. This should also be checked in the BIOS of the computer.