RED COMPACT 35, Installation And User Manual

Page: 4 / 64

2
1-WARNINGS AND WARRANTY TERMS
SAFETY PRECAUTIONS
•
Installation, electrical connection, function test and maintenance must only be carried out by authorised and
qualified personnel.
• Install the product in accordance with all local and national legislation and regulations in force in the region or state.
• Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator. It is strictly forbidden to use
liquid fuel.
• Do not put any fuel other than wood pellets in the hopper.
• The instructions provided in this manual must always be complied with to ensure the product and any electronic appliances
connected to it are used correctly and accidents are prevented.
• The user, or whoever is operating the product, must read and fully understand the contents of this installation guide before
performing any operation. Errors or incorrect settings can cause hazardous conditions and/or poor operation.
• Do not climb on or lean on the product.
• Do not put linen on the product to dry. Any drying racks or similar objects must be kept at a safe distance from the product. Fire
hazard.
• All liability for improper use of the product is entirely borne by the user and relieves the Manufacturer from any civil and criminal liability.
• Any type of tampering or unauthorised replacement with non-original spare parts could be hazardous for the operator’s safety and
relieves the company from any civil and criminal liability.
• Many of the surfaces of the product get very hot (door, handle, glass, smoke extraction pipes, etc.). Therefore, avoid touching
these parts without wearing suitable protective clothing, such as heatproof gloves.
• It is forbidden to use the product with its door open.
• The product must be powered by an electrical system that is equipped with an effective earthing device.
• Switch the product off in the event of a fault or malfunction.
• Do not wash the product with water. The water could get inside the unit and damage the electrical insulation and cause electric
shocks.
• Install the product in a location that does not present a fire hazard and is equipped with power and air supplies and smoke extractors.
• In the event of fire in the chimney, turn off the device, disconnect it from the mains electricity and do not open the hatch. Then
contact the competent authorities.
• In the event of a malfunction with the ignition system, do not force it to light by using flammable materials.
• Special maintenance must only be performed by authorised and qualified personnel.
• Evaluate the static conditions of the surface on which the weight of the product will stand and provide suitable insulation if it is
made of a flammable material.