RED COMPACT 35 Easy Clean Installation Manual Download Page 39

Page: 39 / 76

Product Type
Firmware Version

Product Type 01
Firmware Version 01

12-MENU ENTRIES AND OPERATION

CONTROL PANEL DISPLAY

Menu options

The boiler has a modern touch-screen display used to adjust individual functions in a user-friendly manner.

Press the controls on the touch-screen display to launch them.

We recommend:

• not using protective films

• not putting the touch screen display in contact with water; it might not work in the presence of humidity

• do not touch the display with sharp objects to avoid damaging it

Note: The keys shown here above in the display are not real (not visible). They are only used to make it easier to

understand the functions in the following explanations.

If no key is used for 10 seconds, the display goes back to the main screen

INITIAL START-UP

As soon as the boiler is powered, the words “Product Type” and “Firmware Version” will appear on the display and start flashing until it

automatically carries out all the checks. Then the set factory value will appear without flashing. The boiler will now show the first screen

to use the functions.

Press key 1 (OFF) for a few seconds to turn on the boiler (ON). An icon with a flashing flame will appear (a).

OFF

10:29

Eco Mode on

20°

50°

70°

10:29

Eco Mode on

20°

50°

70°

Summary of Contents for COMPACT 35 Easy Clean













































































Search results

Summary of Contents for COMPACT 35 Easy Clean

Reviews:

Related manuals for COMPACT 35 Easy Clean

Brands by name

Popular brands

RED COMPACT 35 Easy Clean, Installation Manual

Search results

Summary of Contents for COMPACT 35 Easy Clean

Reviews:

Related manuals for COMPACT 35 Easy Clean

Brands by name

Popular brands