16
Vise Center Calibration:
1. Prepare a rectangular or circular material and mark a dot on the center of the material with
marker pen.
2. Turn power ON pressing
, then release the button as soon as machine beeps.
3. Tool will move to the center of vise, then red laser pointer will be lit.
Button Use:
Short each button press moves the pointer to the left/bottom or right/top depending on its mode.
Long press of
button will change mode to left/right movement or top/bottom movement.
Long press of
button saves pointer calibration and return home.
Short Press
Long Press
Short Press
Long Press
Left/Right
Top/Bottom
●
●
●
Mode
Change
Up
Move
Down
Move
Save Calibration
and return home.
Left
Move
Right
Move