OTHER MENU FUNCTIONS
MODULATION
The MODULATION function is also contained in the [MENU] section. These settings determine the amount of depth
for the MODULATION WHEEL and AFTER TOUCH MIDI controllers.
To access these settings, press the MENU button labelled [MODULATION], as shown in the following example:
The indicator in the [MODULATION] button will light and the main display will now alternate between the first
function and its current value, as shown below:
There are four functions in the MODULATION menu as follows:
This function allows you to set the amount of pitch modulation that will
be applied when the Modulation Wheel is used. RANGE = +7 to -7.
This function allows you to set the amount of filter modulation that will
be applied when the Modulation Wheel is used. RANGE = +7 to -7
This function allows you to set the amount of pitch variation that will be applied
when After-Touch controller data is received. RANGE = +7 to -7
This function allows you to set the amount of filter variation that will be applied
when After-Touch controller data is received. RANGE = +7 to -7
Use the menu [EDIT - VALUE + and VALUE -] buttons to change the setting as follows:
To select a different menu function, use the [MENU UP and [MENU DOWN] buttons.
To EXIT modulation menu mode, simply press the [MODULATION] MENU button and check that the indicator goes
out.
1. Modulation Wheel - Pitch Mod Depth:
2. Modulation Wheel - Filter Mod Depth:
3. After-Touch - Pitch Mod Depth:
4. After-touch - Filter Mod Depth:
NOTE: if pitch mod source is set to envelope 1
or 2 then the mod wheel will affect the amount of pitch envelope modulation.
PARAMETER
VALUE
New setting = - 6
PARAMETER
VALUE
New selection =
AFTER-TOUCH PITCH MOD
Press once to exit
MODULATION menu mode
MENU
VALUE
VALUE
EDIT
save
COMP
OSCILLATORS
Press the [VALUE+]
and [VALUE -] buttons
to change the setting
MENU
VALUE
VALUE
EDIT
save
COMP
OSCILLATORS
Press the UP and
DOWN buttons to
select MENU functions
MODULATION
MIDI
PORTA TRIGGER
/
OWNERS MANUAL
29
PA
G
E
Operation
PARAMETER
VALUE
PARAMETER
VALUE
Setting = 0
Function =
Mod wheel
pitch modulation
Display alternates
between
MENUS
OSCILLATORS
audition
MODULATION
MIDI
LFO
FILTER
PORTA TRIGGER
PART
MENU
VALUE
VALUE
EDIT
save
COMP
/
