ENGLISH
23
Example of message:
This is a security message from [your name] at [your
address]. When you have listened to the message, press
hash (#) and then 1 to listen to this address, or 3 to
speak.
Step 2: In setup mode
Playing back a
message
To listen to your recorded message, press in and release
Rec/Play
.
Checking the
telephone number
Press the Menu button
(1 is shown on the display
for the first number).
Press the Menu button
again to check the following
numbers.
Entering and storing
telephone numbers Press the Program button
(1 is shown on the
display for the first number).
Repeat this to select which telephone number (1–8) you
want to program.
Key in the telephone number (maximum of 15 digits).
If you have entered a wrong number, press Clear
to delete and then key in the telephone number again.
Press Enter/Exit
to finish.
Deleting stored
telephone numbers Press the Menu button
(1 is shown on the display
for the first number).
Repeat this to select the telephone number (1–8) you
want to delete.
Press Program
and then Enter/Exit
to confirm
the deletion.
Programming the
number of call
cycles
Press the Menu button
(1 is shown on the display
for the first number).
Repeat this until (3) is shown on the display.
Press Program
and then specify the number of
cycles you want the dialler to complete (select 1 to 9
cycles, the default setting is 3 cycles) and press
Enter/Exit
to confirm.
Changing the 4-digit
PIN code
Press the Menu button
(1 is shown on the display
for the first number).
Repeat this until (3) is shown on the display.
Press Program
and key in a new 4-digit PIN code.
Key in the new 4-digit PIN code again and press
Enter/Exit
to confirm.
Summary of Contents for 41-087
Page 25: ......
