EL212 Installation Guide Rev 16-Jan-14
Page 4 of 28
About This Guide
Purpose
This guide gives specific information on how to properly install and maintain the switch.
Audience
The guide is intended for use by network administrators who are responsible for installing and setting up
network equipment; consequently, it assumes a basic working knowledge of electrical safety and any local,
regulatory or corporate rules for the installation of industrial electrical equipment.
Conventions
The following conventions are used throughout this guide to show information:
Note or Notice:
Emphasizes important information or calls your attention to related features or instructions.
Caution, risk of danger:
Alerts you to a potential
hazard that could cause loss of data, or damage the
system or equipment. Documentation must be
consulted in all cases where this symbol is marked.
Typical caution symbol.
Warning, risk of electrical shock:
Alerts you to a
potential hazard that could cause personal injury.
Typical warning symbol.
Related Publications
The following publication details the software features of the switch, including the Web interface, CLI and
much more:
EL Series Management Guide
Also, as part of the switch’s software, there is an online web-based help that describes all
management related features.
Revision History
First release.
Copyright & Trademarks
Copyright
2014 Sixnet Inc. All Rights Reserved.
Note: All information in this document is subject to change without notice.
Summary of Contents for EL212F
Page 2: ...EL212 Installation Guide Rev 16 Jan 14 Page 2 of 28 This page intentionally left blank ...
Page 14: ...EL212 Installation Guide Rev 16 Jan 14 Page 14 of 28 Mechanical Dimensions for the EL212 ...
Page 28: ...EL212 Installation Guide Rev 16 Jan 14 Page 28 of 28 This page intentionally left blank ...