red lion EL212F, Installation Manual

Page: 24 / 28

EL212 Installation Guide Rev 16-Jan-14 Page 24 of 28
Section 7 Reset Button
Reset Button
A reset button has been provided in the event that a full hardware reset of the switch is
required. The reset button is accessed through a small hole in the front of the switch near
the status LED. See the image below. Simply use a straightened paper clip to push in the
reset button. There is one mode of operation as described below.
Hardware
Reset
To simply perform a hardware reset just push in the reset button momentarily. The switch
will then immediately perform a hardware reset which takes around 2 minutes. The switch
will not function or be accessible during this period.
Reset Button Hole