2
Drawing No. LP1159
Effective 06 2020
Supply Voltage: 12 to 24 VDC +/- 15%, Class 2 source
INPUT VOLTAGE
12 V
24 V
Typical Power DA70A only
4 W
4.5 W
Max Power DA70A only
4.5 W
5 W
Available Power for Modules
(Maximum of 10 modules)
43 W
45 W
Max Power DA70A, with Sleds & USB
16 W
17 W
Max Power DA70A with full accessories
59 W
62 W
2.
BATTERY
: 3 V Lithium coin cell. Typical lifetime of 5 years, at
nominal usage. To maintain UL rating, replacement battery
must be: Red Lion CRA000 BT3V0 00000, Rayovac BR1225X-
BA or Panasonic BR1225A/BN.
3.
MEMORY
:
On Board User Memory: 1 GB of non-volatile Flash memory.
Memory Card: microSD slot accepts Class 5 or better microSD
cards up to 256 GB capacity. FAT32, industrial grade.
4.
COMMUNICATION CAPABILITIES
:
USB Device Port: Isolated USB 2.0 full speed, type B
connection. USB DEVICE PORT IS FOR SYSTEM SET-UP
AND DIAGNOSTICS AND IS NOT INTENDED FOR
PERMANENT CONNECTION.
USB Host Port: Complies with Universal Serial Bus
Specification Rev 2.0. Supports data transfers at high speed
and full speed with over current protection (0.5 A max).
Ethernet Ports: Two 10BaseT/100BaseTX RJ-45 Ports, auto
MDI/MDI-X.
Isolation from Ethernet network to Gateway: 1500 Vrms
Serial Ports: Three serial ports with individual port isolation
available in these two configurations:
DA70A0F
2 - RS-232 ports (RJ12 connectors)
1 - RS-485/422 port (RJ45 connector)
DA70A0G
1 - RS-232 port (RJ12 connector)
2 - RS-485/422 ports (RJ45 connectors)
5.
ENVIRONMENTAL CONDITIONS
:
Operating Temperature Range: -40 to 75 °C
Storage Temperature Range: -40 to 85 °C
Operating and Storage Humidity: 0 to 85% max. RH non-
condensing
Vibration to IEC 60068-2-6: Operational 5-500 Hz, 2 g
Shock to IEC 60068-2-27: Operational 15 g
Altitude: Up to 2000 meters
Installation Category II, Pollution Degree 2 as defined in IEC/
EN 60664-1.
6.
CERTIFICATIONS AND COMPLIANCES
:
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
IEC/EN 61010-1
RoHS Compliant
ATEX Approved
II 3 G Ex ec IIC T4 Gc
DEMKO 20 ATEX 2268X
IECEx Approved
IECEx UL 20.0007X
UL Hazardous: File # E317425
Rugged IP30 enclosure
7.
CONNECTIONS
:
Power Connection: Three-pin top mounted connector
Wire Strip Length: 0.3" (7.5 mm)
Wire Gauge Capacity: 12 to 24 AWG (3.31 to 0.20 mm
2
)
copper wire only
Torque: 4.4-5.3 inch-lbs (0.5-0.6 N-m)
Module Connection: 8 pin connectors
Wire Strip Length: 0.3" (7.5 mm)
Wire Gauge Capacity: 14 to 24 AWG (2.08 to 0.20 mm
2
)
copper wire only
Torque: 2 inch-lbs (0.23 N-m)
8.
CONSTRUCTION
: Metal and plastic enclosure with IP30
rating. For use only in an approved enclosure.
9.
MOUNTING REQUIREMENTS
: Mounts onto standard DIN
style top hat (T) profile mounting rails according to EN50022
– 35 x 7.5 mm and 35 x 15 mm.
10.
WEIGHT
: 2 lb 2.5 oz (978.05 g)
3.45
(87.63)
6.00
(152.40)
6.02
(152.98)
3.20
(81.23)
6.84
(173.80)
1.35
(34.3)
5.17
(131.28)
6.84
(173.80)
Modules sold separately.
DIMENSIONS In Inches (mm)
