-2-
Bulletin No. CR3000- B
Released 2018-09-10
Drawing No. LP1042
1.
POWER REQUIREMENTS
:
Must use a Class 2 circuit according to National Electrical Code (NEC),
NFPA-70 or Canadian Electrical Code (CEC), Part I, C22.1 or a
Limited Power Supply (LPS) according to IEC 60950-1 or Limited-
energy circuit according to IEC 61010-1.
Power connection via removable three position terminal block.
Supply Voltage: 10 to 30 VDC, Class 2 source
2.
BATTERY
: Lithium coin cell. Typical lifetime of 5 years, nominal.
To maintain UL rating, replacement battery must be: Red Lion CRA000
BT3V0 00000, Rayovac BR1225X-BA or Panasonic BR1225A/BN.
3.
LCD DISPLAY
:
4.
TOUCHSCREEN
: Four-wire resistive analog
5.
MEMORY
:
On Board User Memory: 512 MB of non-volatile Flash memory.
Memory Card: SD slot accepts standard capacity cards.
6.
COMMUNICATION CAPABILITIES
:
USB Device Port
: Isolated and adheres to USB specification 2.0 (high
speed, full speed) only using Type B connection.
USB DEVICE PORT
IS FOR SYSTEM SET-UP AND DIAGNOSTICS AND IS NOT INTENDED
FOR PERMANENT CONNECTION.
USB Host Ports
:
Comply with Universal Serial Bus Specification Rev
2.0. Support data transfers at (high speed, full speed). Hardware
over current protected (0.5 A max per port).
Serial Ports
: Ports are individually isolated. Format and Baud Rates for
each port are individually software programmable up to 115,200 baud.
Port to Port Isolation: 1500 Vrms for 1 minute.
Signal Isolation: 500 V.
Ethernet Ports
: 10 BASE-T / 100 BASE-TX
RJ45 jacks are wired as a NIC (Network Interface Card).
Isolation from Ethernet network to operator interface: 1500 Vrms
7.
ENVIRONMENTAL CONDITIONS
:
Operating Temperature Range: -10 to 50 °C.
CR3000 15": Max operating temperature -10 to 45 °C when using
Cellular Modem Module (CRM000CMCMOD0000) or equivalent.
Storage Temperature Range: -20 to 70 °C
Vibration to IEC 68-2-6: Operational 5-500 Hz, 2 g
Shock to IEC 68-2-27: Operational 30 g
Operating and Storage Humidity: 0 to 85% max. RH non-condensing
Altitude: Up to 2000 meters
Installation Category II, Pollution Degree 2 as defined in IEC/EN 60664-1.
8.
CERTIFICATIONS AND COMPLIANCES
:
CE Approved
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
IEC/EN 61010-1
RoHS Compliant
UL Hazardous: File #E317425
Type 4X Indoor / IP66 Enclosure rating (Face only)
9.
CONNECTIONS
: High compression cage-clamp terminal block
Wire Strip Length: 0.3" (7.5 mm)
Wire Gage Capacity: 12 to 24 AWG (3.31 to 0.20 mm
2
) copper wire
Torque: 4.4-5.3 inch-lbs (0.5-0.6 N-m)
10.
CONSTRUCTION
: Polycarbonate enclosure with Type 4X/IP66 rating
when correctly fitted per the mounting instructions provided.
Protection against mechanical impact up to 5 Joule, IK08 per IEC 62262.
11.
MOUNTING REQUIREMENTS
: Maximum panel thickness is 0.25"
(6.35 mm) with included stiffener plate, or 0.375" (9.53 mm) without
plate. For NEMA 4X / IP66 sealing, the stiffener plate and a panel with
a minimum thickness of 0.06" (1.52 mm) is recommended.
Mounting Screw Torque:
CAUTION: DO NOT OVERTIGHTEN CLAMPS
4", 7" and 10": 4.0 lbf-in (0.45 Nm).
15": 2.0 lbf-in (0.23 Nm).
12.
WEIGHT
: Unit weight with stiffener plate and clips
CR3000 04: 1.00 lb (454 g)
CR3000 07: 2.01 lb (913 g)
CR3000 10: 3.16 lb (1.435 Kg)
CR3000 15: 5.84 lb (2.649 Kg)
MODEL
4.3-INCH
7-INCH
Input Voltage (Volts)
10V 12V 24V 30V 10V 12V 24V 30V
Typ. Power HMI only (Watts) 5.5
6.0
6.0
6.0
9.0
9.0
9.0
9.0
Max Power HMI only (Watts) 7.0
7.5
7.5
7.5
12.5 12.0 12.5 12.5
Max Power HMI w/Module (W) 12.0 13.0 13.0 13.0 17.5 17.5 18.0 18.0
MODEL
10.4-INCH
15-INCH
Input Voltage (Volts)
10V 12V 24V 30V 10V 12V 24V 30V
Typ. Power HMI only (Watts) 12.5 12.0 12.0 12.5 18.0 17.5 17.5 17.5
Max Power HMI only (Watts) 16.5 16.0 16.0 16.5 23.0 22.0 21.5 22.0
Max Power HMI w/Module (W) 21.0 21.0 21.5 22.0 28.0 27.5 27.0 27.5
MODEL
4.3-INCH
7-INCH
10.4-INCH
15-INCH
Type
TFT
TFT
TFT
TFT
Colors
16M
16M
16M
16M
Pixels
480 x 272
800 X 480
800 X 600
1024 X 768
Brightness
500 cd/m
2
430 cd/m
2
400 cd/m
2
350 cd/m
2
Backlight Type
LED
LED
LED
LED
Backlight Life
30K HR TYP.
50K HR TYP.
50K HR TYP.
50K HR TYP.
DIMENSIONS
In
inches
(mm)
4.3 inch
4.12
(104.69)
5.14 (130.65)
4.62
(117.48)
5.65 (143.51)
3.62
(92.08)
1.50 (38.1)
THIS VIEW SHOWN WITH
MOUNTING PLATE AND BRACKETS
1.26 (32)
Module sold
separately
CR3000
04
7.0 inch
5.43
(138.02)
7.63 (193.98)
5.80
(147.32)
8.00 (203.2)
4.80
(121.92)
THIS VIEW SHOWN WITH
MOUNTING PLATE AND BRACKETS
2.00 (50.8)
1.26 (32)
Module sold
separately
CR3000
07
SPECIFICATIONS