3)
On the
Connect To screen
, change the
Connect using
value to the
COM port
the modem is connected to and click
OK.
4)
On the
COM Properties screen
, change the
Bits per second
value to
115200
. Leave all the other options
untouched (8, None, 1, Hardware), and click OK.
You should now be able to send AT commands. You will not see what you type until you send the command ATE1 or
enable echo in HyperTerminal's settings, but the commands will still be sent to the modem. Send ATI1 and confirm that
you see the words “BlueTree Wireless” in the response.
Summary of Contents for BT-6000
Page 15: ...1 3 3 Mechanical specifications BT 6000 ...
Page 16: ......
Page 32: ...Figure 8 Testing the connection ...
