10.2 Install frost filter
Only fix
four
screws like the followings when install frost filter.
11. ERROR MESSAGE
When you turn on the fixture, it will make a rese
t at first. The display may show“Err channel is
XX”
while there are problems with one or more channels. “XX” stands for channel 1, 2, 3,
4, 5,
6
who has the testing sensor for positioning. For example, when the display shows “
Err channel is
Pan movement
”,
it means there is some error in channel 1. If there are some errors on channel 5,
channel 6, channel 1
at the same time, you may see the error message, “
Err channel is Pan
movement
” “
Err channel is Tilt movement
”, “
Err channel is red led
” ,flash repeated
for 2 times,
and then the fixture will generate a second reset. If the fixture remain error message after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual. Please contact with dealer or manufacturer for service, self repair is not
allowed.
PAN- movement Er
(PAN-
yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or
its driving IC on the main PCB). The PAN-
movement is not located in the default position after the reset.
TILT- movement Er
(TILT-
head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or
its driving IC on the main PCB). The TILT-
movement is not located in the default position after the reset.