U
se
r Mo
de
Set
User Mode
Standard Mode
Basic Mode
Extended Mode
User Mode A
User Mode B
User Mode C
User’s mode t
o change
channel numbers
Edit User ModeA
Edit User ModeB
Edit User ModeC
Max Channel = XX
PAN = CH01
:
Preset User modes
Edit
Pr
g
Select Program
Prog. Part 1 = Program 1 ~ 10 Program 1
Prog. Part 2 = Program 1 ~ 10 Program 2
Prog. Part 3 = Program 1 ~ 10 Program 3
Select programs to be run
Edit Program
Program 1
:
Program 10
Program Test
Step 01=SCxxx
Step 64=SCxxx
Testing program
Program in loop
Save and exit
Edit Scenes
Edit Scene 001
~ Edit Scene
250
Pan,Tilt,……
--Fade Time--
--Secne Time--
Input By Out
Save
and
automatically
return
manual scenes edit
Rec Controller
XX~XX
Automat. scenes rec
Default settings shaded
8.1 FUNCTION
8.1.1 Set DMX Address
With this function, you can adjust the desired DMX-address via the Control Board.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
Set DMX Address
is displayed.
3.
Press ENTER, the display will show
Set DMX Address
.
4.
Tap the <Up/Down>button
，
the display will show
“
A001~AXXX
”
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.2 Dmx Value
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a value changing.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
Dmx Value
is displayed.
3.
Press ENTER, the display will show
Dmx Value
.
4.
Tap the <Up/Down>button
，
choose each channel.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.3 Slave Mode
With this function, you can define the device as slave.
1.
Access the main menu.
2.
Tap the <Up/Down>button until
Slave Mode
is displayed.
3.
Press ENTER, the display will show
Slave Mode
.
4.
Tap the <Up/Down>button
，
the display will show “
Slave1
”
,
”
Slave2
”
,
”
Slave3
”
.
5.
Press ENTER to confirm or press <MODE/ESC> to return to the main menu.