2
2.85 (72.5)
4.06 (103)
2.95
(75.0)
0.92
(23.3)
(26.0)
1.02
AC 100-120 / 220-240V
N
24-28V
DC on
24V
+ +
3.9A
Power Supply
L
PSDR095W
NEC Class 2
_
_
DIMENSIONS In inches (mm)
Before operating this unit please read this manual thoroughly and retain this
manual for future reference! This device may only be installed and put into
operation by qualified personnel. If damage or malfunction should occur
during operation, immediately turn power off and send unit to the factory for
inspection. The unit does not contain serviceable parts. The tripping of an
internal fuse (if included) is caused by an internal defect. The information
presented in this document is believed to be accurate and reliable and may
change without notice.
Intended Use: This device is designed for installation in an enclosure and is
intended for general use such as in industrial control, office, communication,
and instrumentation equipment. Do not use this device in equipment, where
malfunction may cause severe personal injury or threaten human life.
INSTALLATION
Mounting orientation must be output terminals on top and input terminals
on the bottom. Do not obstruct air flow as the unit is convection cooled.
Ventilation grid must be kept free of any obstructions. Maintain specified
installation clearances when power supplies are permanently fully loaded:
TERMINALS AND WIRING
Use the appropriate copper cables as listed in the specifications and follow
national installation codes and regulations! Ensure that all strands of a
stranded wire enter the terminal connection! Ferrules are allowed. Unused
terminal must be closed.
WARNING
Risk of electrical shock, fire, personal injury or death.
«
Do not use the power supply without proper grounding (Protective Earth).
«
Turn power off before working on the device. Protect against inadvertent
re-powering.
«
Make sure that the wiring is correct by following all local and national
codes.
«
Do not modify or repair the unit.
«
Do not open the unit as high voltages are present inside.
«
Use caution to prevent any foreign objects from entering the housing.
«
Do not use in wet locations or in areas where moisture or condensation
can be expected.
«
Do not touch during power-on, and immediately after power-off. Hot
surfaces may cause burns.
CONNECTION AND OPERATION INSTRUCTIONS
PSDR095W
AC 100-240V
PSDR030W
Power Supply
L
N
24-28V
+ _ _
24V 1.3A
DC on
0.89
(22.5)
2.95
(75.0)
3.58 (91.0)
DIN-Rail
Depth
DIMENSIONS In inches (mm)
PSDR030W
Power Supply
N L
AC 100-240V
PSDR060W
_ _
+ +
24V 2.5A
DC on
24-28V
DIN-Rail
Depth
1.77 (45.0)
2.95
(75.0)
3.58 (91.0)
0.82
(20.8)
0.47
(12.1)
1.02
(26.0)
0.37
(9.5)
PSDR060W
