21
21
10 - MENU ITEMS AND FUNCTION
Technical Dept. - All rights reserved - Reproduction prohibited
START-UP
Press key
1
(esc) to start up the appliance. The display will show ON with the flashing flame symbol. When the flame stops blinking, the
boiler has reached the operating condition for the “power supply”.
The default target room temperature is set at 20°C. To change this setting, follow the instructions in the adjustments menu; do the same
to set the heating water temperature and the speed of the ventilation fan. To activate an external thermostat, if present, see the dedicated
paragraph.
POWER SUPPLY
When start-up is complete, the panel will display ON with a constant flame at level 3
. The modulation of the flame for higher or
lower power is then controlled autonomously on the basis of the temperatures set in the “System configuration.”
