Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview Download

Page: 67 / 78

Red Hat Cluster Suite Component

Summary

This chapter provides a summary of Red Hat Cluster Suite components and consists of the

following sections:

•

Section 1, “Cluster Components”

•

Section 2, “Man Pages”

•

Section 3, “Compatible Hardware”

1. Cluster Components

Table 2.1, “Red Hat Cluster Suite Software Subsystem Components”

summarizes Red Hat

Cluster Suite components.

Function

Components

Description

Conga

luci

Remote Management System -

Management Station.

ricci

Remote Management System -

Managed Station.

Cluster

Configuration Tool

system-config-cluster

Command used to manage cluster

configuration in a graphical setting.

Cluster Logical

Volume Manager

(CLVM)

clvmd

The daemon that distributes LVM

metadata updates around a cluster. It

must be running on all nodes in the

cluster and will give an error if a node

in the cluster does not have this

daemon running.

lvm

LVM2 tools. Provides the

command-line tools for LVM2.

system-config-lvm

Provides graphical user interface for

LVM2.

lvm.conf

The LVM configuration file. The full

path is

/etc/lvm/lvm.conf.

Cluster Configuration

System (CCS)

ccs_tool

is part of the Cluster

Configuration System (CCS). It is

used to make online updates of CCS

configuration files. Additionally, it can

be used to upgrade cluster

configuration files from CCS archives

Chapter 2.

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2















































































Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Brands by name

Popular brands

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2, Overview

Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Brands by name

Popular brands