Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview Download Page 72

Page: 72 / 78

Function

Components

Description

nanny

The

nanny

monitoring daemon runs

on the active LVS router. Through this

daemon, the active LVS router

determines the health of each real

server and, optionally, monitors its

workload. A separate process runs for

each service defined on each real

server.

lvs.cf

This is the LVS configuration file. The

full path for the file is

/etc/sysconfig/ha/lvs.cf

. Directly

or indirectly, all daemons get their

configuration information from this file.

Piranha Configuration Tool

This is the Web-based tool for

monitoring, configuring, and

administering LVS. This is the default

tool to maintain the

/etc/sysconfig/ha/lvs.cf

LVS

configuration file.

send_arp

This program sends out ARP

broadcasts when the floating IP

address changes from one node to

another during failover.

Quorum Disk

qdisk

A disk-based quorum daemon for

CMAN / Linux-Cluster.

mkqdisk

Cluster Quorum Disk Utility.

qdiskd

Cluster Quorum Disk Daemon.

Table 2.1. Red Hat Cluster Suite Software Subsystem Components

2. Man Pages

This section lists man pages that are relevant to Red Hat Cluster Suite, as an additional

resource.

• Cluster Infrastructure

• ccs_tool (8) - The tool used to make online updates of CCS config files

• ccs_test (8) - The diagnostic tool for a running Cluster Configuration System

• ccsd (8) - The daemon used to access CCS cluster configuration files

Chapter 2. Red Hat Cluster Suite Component Summary

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2















































































Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Brands by name

Popular brands

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2, Overview

Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 5.2

Brands by name

Popular brands