Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Page 92 Configuration Manual Download

Page: 92 / 114

3. Modifying the Cluster Configuration

To modify the cluster configuration (the cluster configuration file

(

/etc/cluster/cluster.conf

), use the Cluster Configuration Tool. For more information

about using the Cluster Configuration Tool, refer to

Chapter 5, Configuring Red Hat Cluster

With

system-config-cluster

Warning

Do not manually edit the contents of the

/etc/cluster/cluster.conf

file

without guidance from an authorized Red Hat representative or unless you fully

understand the consequences of editing the

/etc/cluster/cluster.conf

file

manually.

Important

Although the Cluster Configuration Tool provides a Quorum Votes parameter

in the Properties dialog box of each cluster member, that parameter is intended

only for use during initial cluster configuration. Furthermore, it is recommended

that you retain the default Quorum Votes value of

. For more information about

using the Cluster Configuration Tool, refer to

Chapter 5, Configuring Red Hat

Cluster With

system-config-cluster

To edit the cluster configuration file, click the Cluster Configuration tab in the cluster

configuration GUI. Clicking the Cluster Configuration tab displays a graphical representation

of the cluster configuration. Change the configuration file according the the following steps:

1. Make changes to cluster elements (for example, create a service).

2. Propagate the updated configuration file throughout the cluster by clicking Send to Cluster.

Note

The Cluster Configuration Tool does not display the Send to Cluster button if

the cluster is new and has not been started yet, or if the node from which you are

running the Cluster Configuration Tool is not a member of the cluster. If the

Send to Cluster button is not displayed, you can still use the Cluster

Configuration Tool; however, you cannot propagate the configuration. You can

still save the configuration file. For information about using the Cluster

Configuration Tool for a new cluster configuration, refer to

Chapter 5,

Configuring Red Hat Cluster With

system-config-cluster

Chapter 6. Managing Red Hat Cluster With

system-config-cluster

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0



















































































































Search results

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0

Reviews:

Related manuals for CLUSTER FOR ENTERPRISE LINUX 5.0

Brands by name

Popular brands

Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0, Configuration Manual

Search results

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0

Reviews:

Related manuals for CLUSTER FOR ENTERPRISE LINUX 5.0

Brands by name

Popular brands