Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Configuration Manual Download Page 43

Page: 43 / 114

The following shared fence devices are available:

• APC Power Switch

• Brocade Fabric Switch

• Bull PAP

• Egenera SAN Controller

• GNBD

• IBM Blade Center

• McData SAN Switch

• QLogic SANbox2

• SCSI Fencing

• Virtual Machine Fencing

• Vixel SAN Switch

• WTI Power Switch

The following non-shared fence devices are available:

• Dell DRAC

• HP iLO

• IBM RSA II

• IPMI LAN

• RPS10 Serial Switch

This section provides procedures for the following tasks:

• Creating shared fence devices — Refer to

Section 5.1, “Creating a Shared Fence Device”

The procedures apply only to creating shared fence devices. You can create non-shared (and

shared) fence devices while configuring nodes (refer to

Section 6, “Configuring Cluster

Members”

• Modifying or deleting fence devices — Refer to

Section 5.2, “Modifying or Deleting a Fence

Device”

. The procedures apply to both shared and non-shared fence devices.

Configuring Fence Devices

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0



















































































































Search results

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0

Reviews:

Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0, Configuration Manual, Page: 43 / 114

Search results

Summary of Contents for CLUSTER FOR ENTERPRISE LINUX 5.0

Reviews: