Red Hat CERTIFICATE SYSTEM ENTERPRISE - SECURITY GUIDE, Manual

Page: 13 / 60

Installation
Enterprise Security Client is packaged as a set of RPMs and other files that are part of the
complete Certificate System distribution. These are listed in the installation chapter of the
Certificate System Administrator's Guide.
The first step for installing Enterprise Security Client is successfully obtaining the needed
Enterprise Security Client packages. The Certificate System Administrator's Guide explains how
to retrieve these RPMs and other files through the Red Hat Certificate System 7.2 (AS v.4 for
x86) or Red Hat Certificate System 7.2 (ES v.4 for x86) Red Hat Network channels. There are
two ways to obtain the packages:
• Downloading an ISO image or packages through the Red Hat Network channel
• Using the Red Hat
up2date
utility
On Linux platforms, the preferred method of obtaining RPMs is using the
up2date
command-line utility.
up2date esc
If the
up2date
process is successful, all of the necessary Enterprise Security Client RPMs are
installed and ready for use.
Both the Mac and Windows Enterprise Security Client bundles are available only in the
Downloads area of the Red Hat Network. There are two channels for the packages, one for
32-bit and one for 64-bit; Mac and Windows clients are only available in 32-bit.
• The Mac Enterprise Security Client package is
ESC.dmg
.
• The Windows Enterprise Security Client package is
Smart Card Manager Setup.exe
.
1. Installation on Windows
To install Enterprise Security Client on Windows, do the following:
1. Obtain the Windows Enterprise Security Client installer
Smart Card Manager Setup.exe
from the Red Hat Network channel.
2. Double-click the
Smart Card Manager Setup.exe
file to launch the Enterprise Security
Client installation program.
Chapter 3.
7