RED CAT TEAL Golden Eagle, Operator'S Manual

Page: 34 / 76

33
GIMBAL CONTROL CIRCLE
The Gimbal Control
Circle is only visible
when the Video view is
selected. It disappears
in Map view. This
control provides an
alternate and more
intuitive way to control the gimbal’s pitch.
Touch the bullseye to change the pitch and yaw
of the gimbal.
The up/down directions control the pitch.
Release to stop the movement of the gimbal at
that current position.
Alternatively, press or tap the upper right
switch button on the rear-panel of the TAC to
continuously rotate the camera angle up until
the button is released or until it reaches its
maximum up position. Momentary taps of this
button rotate the camera angle up by about 7-
8° per tap.
Alternatively, press or tap the lower right
switch button on the rear-panel of the TAC to
rotate the camera angle until the button is
released or until it reaches its maximum down
position. Momentary taps of this button rotate
the camera angle down by about 7-8° per tap.
ZOOM IN / ZOOM OUT CONTROLS
Below the camera and gimbal
control panels are the zoom in
and zoom out controls. The EO
camera has 12 levels of digital zoom, the default
being the fully zoomed-out level. The IR camera
has 11 levels of digital zoom. Each “+” or “ - ”
button press changes the zoom by one level.
Alternatively, move the front right 4-position
switch on the TAC to the left to zoom in and to
the right to zoom out.