5. Squeeze a rice grain sized bead of silicone grease on your thumb and forefinger. Taking
care not to pull or stretch the O-ring too much, uniformly spread grease on O-ring. Too
little grease may cause the O-ring to twist in the groove, possibly causing water leakage.
6. Place O-ring in the appropriate O-ring Groove, making sure that it is uniform, not twisted
or bulging out, possibly causing water leakage. When closing back cover, visually check
O-ring surface, tracing a finger over the to making sure no hair, lint or other contaminants
are attached.
IMPORTANT NOTES:
※
When housing is not used for long periods, remove O-rings and place in a plastic bags to
keep them free of dust and other contaminants and store in a place out of direct sunlight.
Please also be careful of prolonged exposure to direct sunlight during use. The O-rings
and housing may become deformed, causing water leakage.
※
After extended periods of non-use, soak empty Housing, with Lens Port attached, in
lukewarm water for half a day. Manipulate all buttons and dials several times. Using a soft,
dry cloth wipe away water.
CAUTION!
※
O-ring are an essential part of waterproofing for this housing. Not properly greasing the O-
rings as directed may cause the O-ring to twist in the O-ring groove, possibly causing
water leakage.
※
Always perform the above O-ring, O-ring groove and O-ring Contact Surface maintenance
and greasing every time you open/close the housing.
※
Please pay close attention and make sure the O-rings are not twisted or bulging, free of
any contaminants (dirt, hair, etc.), and that foreign objects do not obstruct proper closing
of the housing Back Cover or attachment of the Lens Port.
※
DO NOT clean the housing with volatile organic solvents or chemical cleaning agents such
as thinner, gasoline, and benzine, etc.
※
Housing LCD window is manufactured using hard coat acrylic. When cleaning use a clean
soft cloth taking care not to scratch it.
SPECIFICATIONS
Compatible Camera
CANON PowerShot G5 X
Maximum Depth
100 meters (328 feet)
Material
Main Body, Back Cover: Corrosion-resistant Aluminum
Alloy, Anodized
Lens Port: POM
Lever, Buttons, Dials: POM, PC
Lens, Flash & LCD Window: Hard Coat Acrylic
Screws, Springs, Shafts: Stainless Steel, Galvanized
Dimensions
Weight
W150.02mm x D128.51mm x H104.41mm
944g (Land w/Airlock Valve)
305g (Freshwater w/ Airlock Valve & Camera)
Accessories
Diffuser, Strobe Mask-External Strobe Connection Mount (Fiber-
Optic/SEA&SEA) and Screw, Wrist Strap, Reserve O-rings (1
Back Cover, 2 Lens Port), O-ring Removal Pick, O-ring Grease
INSURANCE INFORMATION
※
Insuring your camera is strongly recommend. For more information please contact your
dealer.
8.