Recordex iMMCam LBX-500
Instruction Manual
Page 11
SAVING IMAGES TO INTERNAL MEMORY
You can save up to 80 images to the internal memory of your LBX-500 camera. If you
have the resolution set to 1920x1080 output then you will be limited to 28 images.
WARNING:
If you change the output resolution of the camera (by pressing the
RESET/F17 button for 3 seconds) then all the images stored on the camera’s internal
memory will be deleted.
Ÿ
Press
SAVE (F1)
on the camera or remote to save an image to internal memory.
Each time you press save an image is stored in the next available slot in the camera’s
memory.
Ÿ
To view the saved images press
VIEW (F3)
which will bring up the camera’s photo
album.
Ÿ
Use the
UP(F2), DOWN (F14), LEFT (F7), RIGHT (F9)
buttons to highlight the image
you wish to recall to the main screen then press
ENTER (F8)
to select the image. The
image will now be shown in full screen mode.
Ÿ
From here you can flip through other saved images by pressing the LEFT/RIGHT but-
tons (for previous and next image) or by pressing the UP/DOWN buttons (to skip
ahead or back 4 images).
To go back to the thumbnail album view press
ENTER (F8)
To exit back to normal viewing mode press
VIEW (F3)
Summary of Contents for iMMCam LBX-500
Page 1: ...ENGLISH 500...