15
10. Assembly of the Optional Outrigger
Fig 10.3
Fig 10.4
Fig 10.5
Fig 10.6
Fig 10.7
Tighten the screws using a 17 mm wrench to secure the bracket in place.
Ensure the protruding section of the bed sits within the recess of the bracket
as shown in
Fig 10.3
.
Place the outrigger elbow over the bracket as shown in
Fig 10.4
.
Secure in place by passing the M12 x 80 screw through the top of the elbow
and threading into a large ratchet handle as shown in
Fig 10.4
. Place a
washer onto the screw before attaching the ratchet handle.
Place the tool rest holder onto the elbow as shown in
Fig 10.5
and secure in
place using the tool rest holder screw, large ratchet handle and large washer
as shown.
Ensure the tool rest holder screw is located inside the recess as shown in
Fig
10.6
.
Attach the tool rest holder ratchet handle as shown in
Fig 10.7
.
Place the tool rest inside the holder and secure in place using the ratchet
handle.
Outrigger bracket
Lathe bed
Summary of Contents for Coronet Envoy
Page 37: ...37 ...